Preparatory Work Before Installation
Before installing the tension spring, the following preparations are required:
Tool Check: Ensure that pliers, gloves, and other tools are complete and in good working order.
Spring Inspection: Confirm that the spring is free from deformation, cracks, or other defects.
Environmental Cleaning: Keep the work area clean and avoid clutter.
Protective Measures: Wear protective glasses and gloves to prevent accidental injury.
Correct Installation Steps
Install the tension spring according to the following steps:
Locating Fixing Points: First, determine the connection positions at both ends of the spring.
Pre-stretching Treatment: Use tools to stretch the spring appropriately to the installation length.
Connecting and Fixing: Securely connect both ends of the spring to the designated positions.
Checking and Confirming: After installation, check that the spring is secure.
Troubleshooting Common Problems
The following problems may occur during installation:
Installation Difficulty: Check if the spring length is appropriate; replace if necessary.
Spring Deformation: Apply force evenly during installation to avoid excessive localized stress.
Unstable Fixing: Ensure the connection points are secure; add fixing devices if necessary.
Abnormal Noise: Check if the spring is rubbing against other components.
